FAQs

Texas Fluid Power repairs hydraulic motors near Houston, including piston motors, bent-axis motors, gear motors, and hydrostatic motors used in heavy equipment and industrial machinery.

Texas Fluid Power is known for hydrostatic pump and hydrostatic motor repair. Hydrostatic systems require specialized experience, especially closed-loop drive systems, and this is a core focus of our shop.

Texas Fluid Power repairs hydraulic and hydrostatic equipment in Houston including pumps, motors, cylinders, valve banks, manifolds, final drives, and winches.

Hydraulic pumps can be rebuilt at Texas Fluid Power in Humble, Texas. Our rebuild process includes teardown, inspection, replacement of wear components, correction of damage, and testing.

In most cases, rebuilding a hydraulic pump is significantly cheaper than buying new. New pumps often have long lead times and high costs, while a rebuild can restore performance at a fraction of the price if the housing and major components are within specification.

Rebuilding a hydraulic motor is usually much cheaper than replacement. A professional rebuild can restore torque, efficiency, and reliability without the cost or delay of buying new.

A properly rebuilt hydraulic pump can perform as well as a new pump. When rebuilt correctly and tested, a pump can return to OEM-level performance.

Remanufactured pumps typically undergo a more comprehensive process than a simple repair. A remanufactured pump is restored to OEM performance standards and tested to confirm operation.

A properly remanufactured hydraulic motor can match the performance of a new motor when built to OEM specifications and installed correctly.

A repair addresses a specific failure. A rebuild replaces wear components and corrects damage. Remanufacturing restores the component to OEM-level performance expectations through a more complete process and testing.

Hydraulic pump rebuild time depends on model, condition, and parts availability. Many rebuilds are completed within one to three business days. Complex or heavily damaged pumps may take longer.

Hydraulic motor rebuild timelines vary by design and damage. Texas Fluid Power focuses on fast turnaround and will provide an estimate after inspection.

Yes. Many failed hydraulic pumps can be rebuilt unless damage is catastrophic. Texas Fluid Power inspects each unit and determines whether rebuild, remanufacture, or replacement is the best option.

Common causes of hydraulic pump failure include contamination, overheating, cavitation, poor filtration, incorrect oil, pressure spikes, misalignment, and system issues.

Hydraulic motor failures are often caused by contamination, excessive load, overheating, internal leakage, or system problems upstream.

Hydrostatic pump failures are commonly caused by contamination, low charge pressure, overheating, improper flushing, air ingestion, or operating outside design limits.

Yes. Texas Fluid Power emphasizes root cause analysis. Understanding why a component failed helps prevent repeat failures and additional downtime.

Many contaminated pumps can be rebuilt if internal damage is not severe. Texas Fluid Power evaluates contamination damage and advises on proper flushing and filtration.

Failure to flush the system after a pump failure can cause immediate damage to the rebuilt or new component. Contamination is one of the leading causes of repeat failures.

A rebuilt pump can fail again if the root cause is not addressed. Proper flushing, filtration, cooling, and system checks are critical.

Yes. Texas Fluid Power provides a one-year warranty on repairs, subject to application, operating conditions, and installation requirements.

When properly rebuilt, installed, and maintained, rebuilt hydraulic pumps can last as long as new pumps.

Rebuilt hydraulic motors can provide long service life comparable to new motors when rebuilt and installed correctly.

Often yes. Rebuilding hydraulic components is frequently more cost-effective than replacing entire machines or systems.

Yes. Texas Fluid Power repairs and rebuilds hydraulic cylinders including seal replacement, inspection, rod evaluation, and reassembly.

Rebuilding a hydraulic cylinder is usually much cheaper than replacement, especially for large or custom cylinders.

Yes. Texas Fluid Power repairs hydraulic valve banks, control valves, and manifolds, addressing internal leakage, sticking spools, and contamination damage.

Yes. We repair hydraulic final drives and winches used in heavy equipment and industrial machinery.

Yes. Testing is a critical part of our process. Components are tested to verify pressure, flow, and proper operation before return.

Yes. Texas Fluid Power helps customers determine whether the issue is a pump, motor, valve, or system-level problem.

Symptoms such as noise, heat, low pressure, slow response, or erratic operation may indicate pump issues, but system problems can produce similar symptoms.

Loss of torque, overheating, internal leakage, or inconsistent speed may indicate hydraulic motor problems.

Yes. Texas Fluid Power has extensive experience with oilfield, drilling, and frac-related hydraulic and hydrostatic equipment.

Yes. We repair hydraulic components used in excavators, loaders, cranes, and other construction equipment.

Yes. Texas Fluid Power services industrial hydraulic pumps, motors, cylinders, and valve systems used in manufacturing and processing.

Yes. We service both OEM and aftermarket hydraulic and hydrostatic components across many manufacturers.

When possible, Texas Fluid Power prioritizes urgent repairs to minimize downtime. Call to discuss timing and availability.

Yes. Customers across Texas and the U.S. ship components to our Humble, Texas facility for repair and remanufacturing.

Providing model numbers, serial numbers, machine type, symptoms, operating conditions, and recent maintenance history helps speed up quoting.

Customers choose Texas Fluid Power for technical expertise in hydraulics and hydrostatics, fast turnaround, thorough testing, honest recommendations, and decades of experience.

Rebuilding saves money, reduces lead time, restores performance, and extends equipment life while avoiding unnecessary replacement costs.

Call Texas Fluid Power at 281-400-2061 or bring your component to 20702 Townsen Blvd, Humble, TX 77338 to speak with a technician and begin the repair process.